Everything you need to know about exterior house painting in Mesa, AZ

Everything you need to know about exterior house painting in Mesa, AZ

 

First, the exterior house painting in Mesa, AZ needs to evaluate the job. The area to be painted needs to be measured and then inspected. Correct measurements ensure the right amounts of paint and materials needed are on site so the job can progress smoothly without interruptions due to lack of materials.

 

A thorough inspection of exterior house painting in Mesa, AZ is needed to decide how the job will progress and what it will include. For instance, is it new construction that just needs primer and paint? Or an existing structure that will need extensive prep work to make sure the paint job holds up? Are there any areas that need repair before the painter begins? There is nothing worse than a paint job that covers up existing problems only to be revealed shortly after a painter has finished their work. Now that the job details have been decided upon and the homeowner has approved, the work can begin. The structure needs to be prepped first. Scraping and a good power wash will get the surface free of old paint and debris that will hinder the adherence of the new paint and primer. Next, any minor patching needs to be done. Possibly painter's caulk in small holes that are only cosmetic.

 

Any areas that were repaired or caulked should receive a spot coat of primer. The primer should be of very high quality. This will make sure the paint bonds well to the surface. The whole house needs to be primed. Application methods will vary by the painter and the building being painted. Is the surface smooth enough to spray? Can it be rolled? Does it need to be rolled and then brushed out? Or does it all have to be brushed? These decisions will be based on the type of product being applied and the building being painted. Finally, the exterior house painting in Mesa, AZ. Again, a high-quality paint should be used to ensure the longest lasting job. The same application questions apply. Spray, roll, or brush on? After a first coat is applied does it need another? Typically a second coat will result in the best result.