Exterior Painting in Tempe, AZ Tips To A Better Looking House
One of the most important things you can do to protect your most treasured asset is taking on a thorough exterior painting project. The project calls for requisite steps that have to be considered before applying paint. One also has to consider important application procedures that can result in a scintillating paint job. Here are three important steps to consider when Exterior Painting in Tempe, AZ parts of your house.
Use M1 and bleach to pressure wash your house before painting it. This will get rid of wasp nests, green algae, flaking paint and mildew. Scrap off debris of loose paint with a metal brush and a sharp scrapper. Using a sand paper, soften all wooden parts to prepare them for primer. Remember to wear eye protection when sanding wood and scrapping dirt off the walls. Start painting from the top and work your way down. Hold the nozzle six inches away from the surface at a 45 degree angle. If masonry is less than six years old, it can leach out under a painted coating. If it is less than 6 years, you can easily avoid the problem by etching with muriatic acid. The right proportion is 1 part of acid to 5 parts of clean water. Remember to wear goggles and gloves for protection as muriatic acid is extremely caustic. Splash the compound into concrete to neutralize the acid in it. Then wash off the solution with cold water. Your concrete is now etched, ready for fresh painting.
Inspect metal surfaces for peeling paint. Such surfaces include railings and gutters. Remove the loose paint with a power brush or a simple metal brush. Then using an acrylic bonding primer, prime the bare metal. If you are painting bricks, check for cracks then caulk them before painting. Remember to mask motion sensors, light fixtures and electrical boxes. Remember to also cover your windows with plastic tape, to save you time and energy when cleaning up. For best results call out Exterior Painting in Tempe, AZ.